Top 5 Common Plumbing Problems and How to Fix Them
Plumbing problems are common in many households, causing inconvenience and frustration. Here are the top five common plumbing problems, and we provide you with solutions to fix them.
From leaky faucets to clogged drains, plumbing problems can disrupt your daily routine and even lead to expensive repairs if left unattended. But with the right knowledge and a few simple fixes, you can save yourself the hassle and the extra expenses.
We will provide step-by-step instructions to troubleshoot and fix these common plumbing problems. Whether it’s a dripping showerhead, a running toilet, or a blocked pipe, we’ve got you covered.
Common plumbing problem 1: Leaky faucets
Leaky faucets are a common plumbing issue that can waste a significant amount of water if left unfixed. The constant dripping noise can also be quite irritating. The most common cause of leaky faucets is worn-out washers, seals, or O-rings. However, it can also be due to corroded or damaged pipes, loose parts, or high water pressure.
To fix a leaky faucet, you’ll need to turn off the water supply to the fixture and disassemble the faucet to inspect the washer, O-ring, and seal for damage and replace any worn-out parts with new ones.
How to fix leaky faucets
- Turn off the water supply to the fixture.
- Disassemble the faucet and inspect the washer, O-ring, and seal for damage.
- Replace any worn-out parts with new ones.
- Reassemble the faucet.
- Turn on the water supply and test the faucet for leaks.
- If the leak persists, you may need to replace the entire faucet. Consult a professional for assistance and leaking tap repairs.
Common plumbing problem 2: Clogged drains
Clogged drains are another common plumbing issue that can cause water to back up and create a mess in your bathroom or kitchen. The most common cause of clogged drains is the accumulation of hair, soap scum, food particles, or grease in the pipes. However, it can also be due to tree roots, foreign objects, or damaged pipes.
To fix a clogged drain, start by using a plunger. If the plunger doesn’t work, try using a drain snake. Insert the snake into the drain and turn the handle to dislodge the blockage. You can also use a mixture of baking soda and vinegar to dissolve the clog. Pour half a cup of baking soda followed by half a cup of vinegar into the drain. Cover the drain with a plug and let it sit for 30 minutes. Then, pour hot water down the drain to clear the clog.
How to fix clogged drains
- Use a plunger to create suction and dislodge the blockage. Place the plunger over the drain and create a seal. Push and pull the plunger vigorously to create suction. Repeat this several times until the water drains properly.
- Use a drain snake to break up the clog.
- Use a mixture of baking soda and vinegar to dissolve the clog.
- Contact a professional for assistance with blocked drains if none of these methods work.
Common plumbing problem 3: Running toilets
Running toilets are a common plumbing issue that can waste a significant amount of water and increase your water bill. The most common cause of running toilets is a faulty flapper valve. You can purchase a flapper valve at your local hardware store. However, it can also be due to a damaged fill valve, a corroded overflow pipe, or a loose chain.
How to fix running toilets
- Remove the tank lid and inspect the flapper valve.
- Replace the flapper valve if it’s damaged.
- If the flapper valve is in good condition, adjust the chain length or the float arm to ensure that the tank water level is below the overflow pipe.
- Replace the fill valve if the problem persists.
- Turn on the water supply and test the toilet for leaks.
- If the problem persists, contact a local plumbing company for a toilet repair service.
Common plumbing problem 4: Low water pressure
Low water pressure is a common plumbing issue that can make showering and washing dishes a frustrating experience. The most common cause of low water pressure is a clogged aerator or showerhead. However, it can also be due to a leaky pipe, a faulty pressure regulator, or a closed valve.
To fix low water pressure, clean the aerator or showerhead by soaking it in vinegar overnight to remove any mineral buildup.
If the water pressure is still low, check the main shut-off valve to ensure it’s fully open. If it’s partially closed, open it all the way. You can also check the pressure regulator to ensure it’s working correctly. If it’s faulty, replace it with a new one.
How to fix low water pressure
- Clean the aerator or showerhead to remove any mineral buildup.
- Check the main shut-off valve to ensure it’s fully open.
- Check the pressure regulator to ensure it’s working correctly.
- Contact a local plumber if none of these methods work.
Common plumbing problem 5: Burst pipes
Burst pipes are a severe plumbing issue that can cause significant water damage to your home. The most common cause of burst pipes is frozen pipes. When water freezes, it expands and can cause the pipe to burst. However, it can also be due to corroded or damaged pipes, high water pressure, or tree roots.
How to fix burst pipes
- Turn off the water supply to your home and open all faucets to drain the water from the pipes.
- Locate the burst pipe and turn off the water supply to that specific area.
- Cut out the damaged section of the pipe and replace it with a new one.
- Use compression fittings or soldering to attach the new pipe.
- Contact a plumber for professional pipe repairs.
Most common plumbing issues we get calls for, are leaky faucets, clogged drains, running toilets, low water pressure, and burst pipes. There are some easy fixes to simple plumbing issues. However, it’s always best to seek the help of a professional plumber.
Contact us for expert plumbing help. 24/7 response and plumbing emergency discounts.